|
after taking apart the piston the bike set for a few months covered, as you can see the magneto
(peeps from the dangling plastic bag) started to rust
|
circlip exchange
|
|
|
all parts were piled in this box for future assembly
|
assembling the upper heat resistant gasket while holding the timing chain with a long nose pliers-
if the chaing falls deep into the engine block in this stage it is quite a problem to yank it back up
|
the starter clutch that we saw earlier rests in the plastic bag along with bolts of the engine block cover
|
|
the new kit order came from procycle.com to the girls seminar where I was working in the mornings,
right to the landlord hands which passed it to me.
|
assembling the front chain tensioneer, while the chain grow longer when used, this mechanism
takes care it is still properly adjusted, a slack in this chain might couse timing and power problems
|
the engine did not start again, so lets cover it so no debris will enter the block
until, ... until next try
|
|
you need to assemble rings in the correct way and order
| | |