default 2.1
admin(1234)
access point(AP):connect it to the hub
-with a net cable connected to each of them:
ap1: mode: AP
ssid: x
channel: x
ap2: mode: AP
ssid:x,y (x for roaming)
channel: y (must not be the same)
-without a cable between them (only wireless):
ap1: mode: AP WDS (+mac)
ssid: x
channel: x
ap2: mode: AP WDS (+mac)
ssid: y
channel: x (same chanel)
level 1 1418 tx (cable router):
192.168.123.254
password (admin)
LEVEL 1 CAMERA 1010:
from explorer: 0.99
user : root, password: mac address(on the buttom
of the device)
at network: remove the reset ip the next boot check box
add gateway+ dns servers
add regular user for watching
change the port from 80 to 8010 (other)
-motion detection:
check box:enable motion detection
name it and streach the window
sensitivity: 80% persentage 7% ,save
u MUST check that the RED sensor is jumping when motion
is detected !
at application: scedule the days u want it to watch
(from hour to hour)
select checkbox event operation at triger condition
select the motion windowat triger action select all
4 checkboxes, send snapshots by mail -save
than check at the log file that motion is detected !
-for watching from the web: on the FW make direct
ports 5001+5002+5003 udp+tcp
|