user Admin (Admin)----- -has a build in dhcp of 172.16.1.33/255.255.0.0 ,gatway +dns+dhcp: 172.16.0.1 -copy speed is 30 mega=6 minutes -the router can work as a hub for 2 computers and deliver files instalation: -connect it to ethernet & phone line. upper link is for power, middle link is forconection status-green is connected, orange-stuck- error in the information required to register, lower link-ethernet connection. -remove the ip address at the ethernet card (10.200.1.1) leave it on dhcp. at the explorer enter at 172.16.0.1 configure: 8,48, vmux username like:ronen-s1@IActcom ,password,save. middle light should b constant green -at the station:connect the usb wireless ethernet card, run setup from the light blue cd. than it will ask for driver and will install a wireless network card. at the panel u will c a red circle with a kinda building inside. if it is green-your on. if not double click on it| site survey tab|scan|connect. at the encription tab|choose 64 bit and enter the key number of the router itself (writen on the bottom of the device in bracets[] than at the status tab u can c the connection quality.